Previous Thread
Next Thread
New Reply
Print Thread
Rate Thread

Joined: Feb 2004
Posts: 4
New Member
2000 Toyota Celica
New Member
2000 Toyota Celica
Joined: Feb 2004
Posts: 4
Hi,

I bought a used 2000 GTS with 76,000 miles on it. I had a good mechanic check up my car, and everything seemed ok. He worked for Toyota dealer for 16 years, but now he's on his own.

I've been browsing this forum for some time now. And I've read the thread about the bolt being broken and then the GTS wasn't able to get lift.

However, I do have a different lift problem. It is kind of wierd. My lift kicks in around 5500, which is a bit earlier. When it reaches around 6500, I feel that the engine's kick wasn't as strong as it was. However, unlike the experiences described by people who had their bolts broken, my celica still accelerates rather smoothly even until the redline, but the power somehow doesn't feel as strong as when the VVTL-i first kicked in.

I'm not sure when people say "i love hitting lift", how that "lift" should really feel like. I used to drive an Integra 97 GSR, and the VTEC really, REALLY kicks in at the higher RPM. Unlike the integra, I feel that this engine does not have as much power. I don't want to offend any of you celica enthusiastics, but I can safely say that the VTEC design is still a masterpiece.

Nevertheless, I'm not sure if the acceleration of a celica GTS is SUPPOSED to be the same as that of Integra GSR's VTEC? And if not, does my engine sounds like it was modded before? such as having the VVTL-i kick in earlier than it should? Because I've heard people who have lowered their Integ's VTEC to kick in at around 4000, thus feel the power earlier but losing it later at the higher RPM. I'm wondering if it seems like the case for me.

By the way, when I bought the car from a dealer, the car was extreley clean. Most of the milage, from what it seemed, were highway miles. The person before me MIGHT have installed a K&N filter, because the sensor right beside the filter was clogged with oil when the mechanics checked it, which he said could only mean that the filter was changed to K&N. Therefore, I believe that the previous owner(s) were not hardcore racers. The rims are stock too, so is the exhaust. So I'm pretty confident that when I bought it, it wasn't used for racing.

So I'm basically asking... 1) Is my car's lift experience "normal", and 2) If it isn't, was the powerband possibly shifted in anyway? 3)Or, if anybody knows what COULD be the problem if this case isn't normal?

Joined: Feb 2004
Posts: 156
Member
2003 Toyota Celica
Member
2003 Toyota Celica
Joined: Feb 2004
Posts: 156
What rpm does your rev limiter hit?

What rpm is your idle at?

Do have factory gauges?



IT IS WHAT IT IS AND EVERYTHING IS EVERYTHING.

Joined: Oct 2003
Posts: 1,226
Specialist
Specialist
Joined: Oct 2003
Posts: 1,226
5500 is a little low and dies at 6500. That's strange. To my knowledge there is nothing to lower the point where the cams switch over for the VVTL-I. Just for an example here. My car hits lift at 6000 RPMs always and screams all the way to redline just around 73,000 miles on my car. There is a definite rush and kick of acceleration. Maybe the bolts are broken or worn and you are not really getting into lift?

Joined: Oct 2003
Posts: 945
Senior Member
2000 Toyota Celica
Senior Member
2000 Toyota Celica
Joined: Oct 2003
Posts: 945
Congrats on the car!

Joined: May 2003
Posts: 2,449
Specialist
2003 Toyota Celica
Specialist
2003 Toyota Celica
Joined: May 2003
Posts: 2,449
u sure you got a GTS?
sounds like a GT redline to me?


I am a HID Maniac!!

Joined: Feb 2004
Posts: 4
New Member
2000 Toyota Celica
New Member
2000 Toyota Celica
Joined: Feb 2004
Posts: 4
I have everything stock, including gauges.
Yes, I'm 100% it's a GTS. The engine says VVTL-i, and the readline is at 7800 or somethin like dat. I wouldn't buy a car not knowing the most simple thing as whether or not it's a GTS, now would I?

Can I check the bolts myself? where are they located?
If not, what's their exact name so I can ask my mechanic to help me check it out?

Joined: Oct 2003
Posts: 1,152
ECelica Jester
2000 Toyota Celica GTS
ECelica Jester
2000 Toyota Celica GTS
Joined: Oct 2003
Posts: 1,152
sounds like a worn engine

Joined: May 2003
Posts: 2,449
Specialist
2003 Toyota Celica
Specialist
2003 Toyota Celica
Joined: May 2003
Posts: 2,449
ic, so you do got a GTS

do you want to go test drive another GTS and then feel the difference between the two?
that way maybe if you tell some mechanic that knows GTS will be able to pinpoint the problem wink


I am a HID Maniac!!

Joined: Aug 2003
Posts: 6,365
Likes: 1
Caleb
2000 Toyota Celica
Caleb
2000 Toyota Celica
Joined: Aug 2003
Posts: 6,365
Likes: 1
i drive an '00 gts and lift for me occurs around 5800 rpms.

the difference though is that acceleration feels the same all the way throughout the fuel cutoff point (8400 rpms).

at no point in lift does my car accelerate unevenly...without anymore info i really don't have any choice but to agree with a couple of people that you may have a worn engine.

definately drive another '00 gts for comparison.

Joined: Jan 2004
Posts: 146
Member
2001 Toyota Celica
Member
2001 Toyota Celica
Joined: Jan 2004
Posts: 146
IMO- Vtec isnt nearly as strong as lift, and somthings up with ur celi, mine pulls in a around 5700 and lasts way through redline... thumbsup happywink

Joined: Aug 2003
Posts: 6,365
Likes: 1
Caleb
2000 Toyota Celica
Caleb
2000 Toyota Celica
Joined: Aug 2003
Posts: 6,365
Likes: 1
Originally Posted by gtstrdstyle
IMO- Vtec isnt nearly as strong as lift, and somthings up with ur celi, mine pulls in a around 5700 and lasts way through redline... thumbsup happywink

vtec is just as strong. you have to think about it in terms of power (civic si uses vtec, but its bhp figures are well below the 180 bhp of the celica, for example)

in terms of proportionality, vtec & "lift" are just about the same.

Joined: Feb 2004
Posts: 4
New Member
2000 Toyota Celica
New Member
2000 Toyota Celica
Joined: Feb 2004
Posts: 4
I suspect the problem is the lift bolt, however, I talked to the mechanic and he says this operation listed here in this PDF file:

http://russ.angrypacket.com/celica/tsb/celicagts.pdf

will cost about 600 dollars labor charge.

confused

dats quite a bit... don't you think?

Joined: Dec 2003
Posts: 207
Duy
Member
2000 Toyota Celica
Member
2000 Toyota Celica
Joined: Dec 2003
Posts: 207
rofl yes, have lucky_317 check it out. 35 bucks for check, and 80 bucks for a change to new bolts wink he goes good shit thumbsup thumbsup thumbsup

Join the conversation - Register Now or Log In to add your comment


Link Copied to Clipboard
Member Spotlight
BLACKGHOST
BLACKGHOST
2003 Toyota Celica GT
IL

Posts: 35
Joined: January 2004
Thank you.: Mama thomas, michelle, mike, scooby,leeo,heavensknight crew westbury,ny
Random: Night time is my time come out and play see ya in the streets.
Show All Member Profiles 
Recent Topics
Spyder Headlight LEDs
by Dxnxld - Mar 25, 2024 6:51am
Anyone ever hear this noise?
by CeliacCelica - Mar 21, 2024 10:51am
Clunking sound (not sure where from)
by Juliansky - Mar 20, 2024 3:01am
Does anybody know where i can find a S53 trans rebuild kit?
by MoreRamenNoodles - Mar 19, 2024 8:57pm
Urgent
by SoloXKay - Mar 19, 2024 11:58am
OEM speedometer on aftermarket ecu
by Penaman99 - Mar 5, 2024 11:23am
Brake master cylinder
by Nigel100 - Mar 5, 2024 2:45am
newly purchased 2000 GTS
by CantShift - Feb 27, 2024 9:06pm
Customize Your Toyota Celica Privacy Policy · About · Contact
Privacy Policy · About · Contact
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.
© CelicaHobby.com, 2001-2024
Powered by UBB.threads™ PHP Forum Software 8.0.0
(Preview build 20230331)