Can't locate EVAP closed canister valve in engine bay
MlodyN
Yesterday at 05:00 PM
Hi,
I've bought my Celica quite recently and wanted to fix the setup of the performance air filter, as the previous owner didn't really do a great job. Initially it was throwing up CEL for lean fuel mixture on Bank 1. After looking into the bay I found out that the electric connector for blue valve was connected into black brick and black connector was connected to blue brick. After switching them around I got rid of CEL.
Now the thing is that the intake pipe has a connection for the tube going to EVAP purge valve, and on different setup I saw that in the engine bay there are supposed to be 3 electric connectors 1 blue and 2 black ones (one with green inside and other with brown).
In my case there is no tube connected to that spot on the intake, and after hours of looking I cannot find either the electric connector for EVAP purge valve nor the valve itself.
It would be great if someone could take a look at the attached images and point me in the right direction.
As a side note, while looking for the missing connector, I have found some loose brick behind the driver side fog light that wasn't connected to anything, but it looks way bigger than other two that connect to other valves
