Celica Forums General Discussion Exterior Rear Bumper

How do I take off my stock rear bumper?? I looked at the installs section, and I only see 4 screws that need to be removed. There has to be something in the middle holding it right? Can someone help please. Thanks

it has a lot of screws holding it...i really don't know but I think you have to remove the back panels in the trunk to get to some of the screws.

Anyone anyone. ttt.

you have to take most of the panels in your trunk, the rubber piece that seals the hatch, you will have to take it off, its really a pain in the ass

http://plaza.umin.ac.jp/~satoshi/mod0A1en.html

http://plaza.umin.ac.jp/~satoshi/modframeen.htm

it really is a pain in the ass

Thanks Satoshi.

The installs section details for ATTACHING an aftermarket rear bumper... four screws and two bolts
https://celicahobby.com/ubbthreads/showflat.php?Cat=&Number=57019

...

when removing your factory stock bumper, look under your car around where your exhaust tip is - you will see a plastic clip holding your bumper into place - now look on the exact opposite side and you will see another. Those will be the two hardest screws to remove - unless you do first, what I do if after everything else is unsuccessful... and just use a case-cutter

those clips suck...