Celica Forums General Discussion General help! can't get licence plate off the car

it is the rear...seems like two screws rust into the hole or something like it...

now i have two different plate front and rear...funny...!!!

help help help

if they are rusted get some wd-40.

yeah that and some elboe grease , no just kidding, you dont want to strip it out, just lube it and tap it out.

mine did the same thing, all you can do is drill it out, then you can usually get to the leftover piece with a small screwdriver, or it stays attached to the bit. The threaded metal is a lot harder than the bolt, so you shouldnt have to re tap if you use a small enough bit. drill slow and straight, The threads are not deep, like 1/4 to 1/2 an inch, good luck!

thanks guys.. i will try wd 40 first ...do not want mess up my self with drill