Celica Forums General Discussion Exterior Ignited Start Button and Carbon Fiber Switches... [PICS]

i have to take a look at the relay, and i'll let you guys know how to wire it up!

thanks bro

Sweet!

For the ingnition button, all you do is wire one to a constant 12 volt, wire another to the ignition wire, and wire the last to the ground. Then depending on if you have one that lights up there will be one to connect to an accessory wire. Thats pretty much it.

If you want i can look under there and give you the exact colors of the wires you have to hook them up to, just pm me and i'll let you know.

Can you take some pics? I work a lot better with pictures.

here's the diagram, hooking it up to the e-brake is for protecting the starter(manual or Auto). in case someone pushes it while the car is running and GRINDS the starter, you don't what that.

I want those soo bad

so do you still have to use the key to start it or what, wouldnt that be a car thiefs dream

hey man if you wire it up like that it won't work, you forgot to include the starter wire. all the button does is turn over the starter, you still need to have the key in and at the "on" postion.

ratfink's response pretty much answers your question as well... your key must be in the ignition and at the "on" position, then you press the start button or it won't work