Huh I shaved off the plastic that surropunded the neon wiring (wires coming from the left in the pic.) Do i have to shave off the plastic thats surrounding the red & green wires (cigarette wires) and fuse them together with the neon ones?
ok,sorry, i didnt see you responded to that one. OK, well im going to finish it tomorrow, because its 12:15 am over here. So when i cut the red wire with the strip/gery spot on it, than what do i do? cut the wire in half?
NO Don't CUT in two, just make carve away the plastic that cover the wire, carve about 1/8 of an inch. about | | << see that two line? carve away that much. that's all you need. Don't cut the red wire into two piece. After you carve the lenght above, take a toothpick and separate the small wires in between the place you carve, insert the wire from the neon in between the red wire and wrap the neon wire all around 1 or 2 round. Tape it with electrical tape and you're done. Before you tape it up, test it first ok? if the neon light up then u're doing right, if it doesn't light up then it's the other red wire with 1 color red wire. So try that.
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.