|
Joined: Sep 2002
Posts: 26
Member
|
Member
Joined: Sep 2002
Posts: 26 |
Opinions Needed I throw myself at the mercy of the public for this one. Try not to make me regret this too much ![wink wink](https://celicahobby.com/forums/images/graemlins/celica/wink.gif) Ok here we go and bare with me as I try and explain this. First of all I am getting the Lambo Door Kit for her. I already know that I love the look there. I am also creating a custom way for my hatch to open. First of all it will "pop out" 3-6" (will decide during fabrication) And then it will Slide up above the car. I am going to do this no mattter what you guys think ![[Razz]](images/graemlins/tongue.gif) simply because it will be easy to take it back to its original if I do not like it. The Question I have for all of you is... I am considering putting side vents on my car also. And this is the bad part. After looking at countless cars I have decided on one. And bad part of this is that it turned out to be a lambo as well. I know what everyone is going to say... and I already know that the Celica is more beautiful than a Lambo so do not waist your breath. But the vent I decided on is off of the 2004 Lambo Gallado. My question first of all is would this combination look good. and Second of all would it take me to the level that I am trying to be a lambo. Currently I have the Veilside Kit all around, Pro Celeb Graphic, And the TRD rear Wing. All of this would of course stay after the modification... so I would still not completely look like a lambo. But I am still wondering. Also if anyone can photochop this or do anything at all to show me what this may look like I would greatly appreciate it.
|
|
|
|
Joined: Dec 2002
Posts: 293
Member 2003 Toyota Celica
|
Member
2003 Toyota Celica
Joined: Dec 2002
Posts: 293 |
i would say, go for it! ![thumbsup thumbsup](https://celicahobby.com/forums/images/graemlins/celica/thumbsup.gif) i like the idea of matching the lambo doors with the side vents..i think they will complement each other ![thumbsup thumbsup](https://celicahobby.com/forums/images/graemlins/celica/thumbsup.gif)
|
|
|
|
Joined: Sep 2002
Posts: 26
Member
|
Member
Joined: Sep 2002
Posts: 26 |
hey dondiemand I owe you... out of 28 people that have looked at this only one has left an opinion. Oh well so goes life. I am working on the design for it right now, but I will still be looking for more response. So let it fly... good or bad
|
|
|
|
Joined: Oct 2002
Posts: 2,667
ECelica Staff
|
ECelica Staff
Joined: Oct 2002
Posts: 2,667 |
This lambo right if it is I think it's gonna look bad-ass with a veilside kit. The veilside kit is a wild kit and I think this would take it to the next level. Go for it Of coarse your always going to have people that say stop trying to be like a lambo ![rolleyes rolleyes](https://celicahobby.com/forums/images/graemlins/celica/rolleyes.gif)
|
|
|
|
Joined: Apr 2003
Posts: 183
Member
|
Member
Joined: Apr 2003
Posts: 183 |
I'll photshop it for you.. send 2 pics, 1 of the lambo and 1 of your celica. It will only take me a few minutes.. not a problem, I am kinda curious myself... send pics JPEG format, as high rez as you can get em, to simon@anim8or.net (keep it under 2 megs total though).
|
|
|
|
Joined: Sep 2002
Posts: 26
Member
|
Member
Joined: Sep 2002
Posts: 26 |
Hey FX-man I can not get any pics on the comp (I am a little behind on times) no digital cam, or scanner. I can steal a pic from the veilside page though if that will work... I will be e-mailing them to youas soon as possable and I thank you for the trouble you will have to go through.
And Ricepowered yes that would be the car. I also have the "Action Package bumper that I put on there when my bumper gets too beat up (until I get the time to repaint and fix the boo-boo's) So you think it would look bad with that?? Thanks for the input you two.
|
|
|
|
Joined: Apr 2003
Posts: 183
Member
|
Member
Joined: Apr 2003
Posts: 183 |
that will work as long as it's sorta close to the same agle (can be opposite side, but like 2 front 3/4 would be fine, something like a front 3/4 and a back 3/4 would not work though). [ 05-12-2003, 07:50 PM: Message edited by: FX-MAN ]
|
|
|
|
Joined: Sep 2002
Posts: 26
Member
|
Member
Joined: Sep 2002
Posts: 26 |
So as long as you can mirror it... is that what you are saying?
|
|
|
|
Joined: Sep 2002
Posts: 26
Member
|
Member
Joined: Sep 2002
Posts: 26 |
So as long as you can mirror it... is that what you are saying?
|
|
|
|
Joined: Apr 2003
Posts: 183
Member
|
Member
Joined: Apr 2003
Posts: 183 |
yup yup... I can mirror it, I just can't change it front to back, the perspective has to be close for it to look totally real. Color change, no problem, even a lighting change I can sorta work with, but VERY different angle is rough. Worst case, I can just paint it in there but that's not very easy with a reflective surface like a car, so a cut and paste job would be easier. Send me pics, and I'll try to do it tomorrow.
|
|
|
|
Joined: Apr 2003
Posts: 183
Member
|
Member
Joined: Apr 2003
Posts: 183 |
![[Linked Image from anim8or.net]](http://www.anim8or.net/LamboVent.jpg) Ok, here it is with my TRD body kit... didn't feel like waiting ![smile smile](https://celicahobby.com/forums/images/graemlins/celica/smile.gif) ... send me your car still though, I'll throw it on yours.. the pic would be better if my stupid stylus wasn't outa batteries (AAAA batteries are tought to find!). If you follow the car's own body lines, I think it looks cool as shit, and it's original, I don't think it looks too "lambo" IMHO [ 05-12-2003, 09:40 PM: Message edited by: FX-MAN ]
|
|
|
|
Joined: Sep 2002
Posts: 26
Member
|
Member
Joined: Sep 2002
Posts: 26 |
I really do appreciate this... and I am still trying to find good matching pics... I wish I had scnner or digi camera right about now... oh well I am sure I will have them to you tomorrow. Once again I really do appreciate this.
|
|
|
|
Joined: Nov 2002
Posts: 447
Senior Member 2000 Toyota Celica GTS
|
Senior Member
2000 Toyota Celica GTS
Joined: Nov 2002
Posts: 447 |
Are you in college or know someone who is? Most schools have a technology department that know what they are doing. Try them out and post the pics. I'm curious as to see what this mod will look like. Most cars with this mod win car shows.
|
|
|
|
Joined: Apr 2003
Posts: 183
Member
|
Member
Joined: Apr 2003
Posts: 183 |
LOOK AT MY LAST POST! I JUST POSTED A PIC! are you guys not able to see it or something? [ 05-12-2003, 10:41 PM: Message edited by: FX-MAN ]
|
|
|
|
Joined: Dec 2002
Posts: 1,660
ECelica Staff 2001 Toyota Celica
|
ECelica Staff
2001 Toyota Celica
Joined: Dec 2002
Posts: 1,660 |
I see it, looks pretty tight. Can you do one with the doors open? and at an angle?
|
|
|
|
Joined: Apr 2003
Posts: 183
Member
|
Member
Joined: Apr 2003
Posts: 183 |
would need a pic of lambo doors in the open position, and it would be MUCH harder
|
|
|
|
Joined: Sep 2002
Posts: 26
Member
|
Member
Joined: Sep 2002
Posts: 26 |
Hey FxMan I amsorry but still no good on the pictures (Partially because I just finished drawing up the design for it (on the car that is) I agree with you about using the natural body curves as to not copy it too much. The only problem I see is making sure that the door still has a good seal afterwards. Other than that I am golden (and that will not slow me down too much) I like the way the "Action Package" looks in my head better than the veilside kit, but I will have to see them both on once this is completed. I am thinking that perhapse a Fiberglass Door Replacement would be the easiest way to start this project, so I ordered some supplies to do a mold of this size (will be my first time on a peice bigger than a simple fender). I will keep trying to find some pics for you and will try and find one of our car with the lambo doors open as well, that is if you are interested in that. Let me know, but now that I pulled the all nighter with my baby, I have to get to work. Hopefully I will have more luck tomorrow night. I once again thank everyone for your input and help.
|
|
|
|
Joined: Sep 2002
Posts: 26
Member
|
Member
Joined: Sep 2002
Posts: 26 |
Hey FxMan I amsorry but still no good on the pictures (Partially because I just finished drawing up the design for it (on the car that is) I agree with you about using the natural body curves as to not copy it too much. The only problem I see is making sure that the door still has a good seal afterwards. Other than that I am golden (and that will not slow me down too much) I like the way the "Action Package" looks in my head better than the veilside kit, but I will have to see them both on once this is completed. I am thinking that perhapse a Fiberglass Door Replacement would be the easiest way to start this project, so I ordered some supplies to do a mold of this size (will be my first time on a peice bigger than a simple fender). I will keep trying to find some pics for you and will try and find one of our car with the lambo doors open as well, that is if you are interested in that. Let me know, but now that I pulled the all nighter with my baby, I have to get to work. Hopefully I will have more luck tomorrow night. I once again thank everyone for your input and help.
|
|
|
|
Joined: Oct 2002
Posts: 2,667
ECelica Staff
|
ECelica Staff
Joined: Oct 2002
Posts: 2,667 |
![shocked shocked](https://celicahobby.com/forums/images/graemlins/celica/shocked.gif) Good Work FX Outcast good luck with your project. ![thumbsup thumbsup](https://celicahobby.com/forums/images/graemlins/celica/thumbsup.gif)
|
|
|
|
Joined: May 2003
Posts: 91
Member 2001 Toyota Celica GT
|
Member
2001 Toyota Celica GT
Joined: May 2003
Posts: 91 |
Looks pretty tight. I personally don't like the side vents, but its different. I like the doors though.
|
|
|
|
Joined: Apr 2003
Posts: 1,899
ThE iRoN mAiDeN 2003 Toyota Celica GT
|
ThE iRoN mAiDeN
2003 Toyota Celica GT
Joined: Apr 2003
Posts: 1,899 |
great use of the channels FX, you gotta love them!
|
|
|
|
Joined: Mar 2003
Posts: 583
Senior Member
|
Senior Member
Joined: Mar 2003
Posts: 583 |
|
|
|
|
|
|
|
|
|
Urgent
by SoloXKay - Mar 19, 2024 11:58am
|
|
|
- Part Reviews
- OEM Parts Catalog
- Body Kits, Ground Effects
- Hoods, Hood Scoops
- Spoilers, Wings, Splitters
- Side Mirrors
- Head/Tail Lights & Bulbs
- Interior Appearance
- Interior Performance
- Engine Dress-up Kits
- Exhaust Systems
- Engine Performance
- Bars, Braces, Coilovers
- Shocks, Springs
- Wheels, Tires, Brakes
- Audio, Video, Security
|
|
|
|