ok..don't get that..i have one..and if you go over speed bumb or just if ur car ran over a small bumb the bar will rattle..i think it'll rub against the hood or on the frame of the body itself..
here's another pic of what i mean..the circle part is where the bar is rubbing against..and the red mark on the left show after you install them you will get the bump..cuz if you go out and look at it, there are like 2 or 3 raised up line so after you bolt it down those line will push the circle thing up...that's y it's raised up or have the bump..
Never heard of Megan Racing, but it looks exactly like the APR strut bar. Just get APR! Hey Spyder, you probably need to tighten your strut bolts a little more, or buy new bolts. It wouldn't just come loose on its own.
The bar shouldn't rub. Its gonna be like 1/16 inch from the hood. Before you tighten the bolts, have a friend pull the bar towards the front from the middle of the bar. Its a tight fit, but it won't make noise when you go around a corner.
Never heard of Megan Racing, but it looks exactly like the APR strut bar. Just get APR! Hey Spyder, you probably need to tighten your strut bolts a little more, or buy new bolts. It wouldn't just come loose on its own.
The bar shouldn't rub. Its gonna be like 1/16 inch from the hood. Before you tighten the bolts, have a friend pull the bar towards the front from the middle of the bar. Its a tight fit, but it won't make noise when you go around a corner.
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.