Celica Forums General Discussion Exterior help: Changing springs!

Hi, where can i find a good tutorial on changing front and rear springs on my suspension. also, what tools are needed?

thanks for the info!

there's an install guide in here..but its really not that hard finding the bolts...

the fronts are easy to change but the rears are a pain in the ass...you'll need an impact wrench for the back.

i didnt have an impact wrench so i used a rachet and a hammer ahahaha goodluck with urs...a spring compressor is also needed. you can rent one in autozone. They require a $40 deposit and you get it back when you return it so it's basically free rental...

here's for the front:
https://celicahobby.com/ubbthreads/thread.f_1869941140_0_collapsed_2__1.html

and here's for the rear:
https://celicahobby.com/ubbthreads/thread.f_1869941167_0_collapsed_2__1.html

hope that helps...btw there's another one in ncDOTorg but doesnt look like it'll help much. feel free to pm me with any ?'s

What about the bump stops? They have to be cut right?

http://www.deepstaged.net/celicahr.htm this is the best tutorial

Link don't work...

Thanks for the help

yea you need to cut the bump stops...trim the bottom