Previous Thread
Next Thread
New Reply
Print Thread
Rating: 3

Joined: May 2002
Posts: 5,979
Likes: 9
ECelica Admin
2001 Toyota Celica GT
ECelica Admin
2001 Toyota Celica GT
Joined: May 2002
Posts: 5,979
Likes: 9
Celica Gauge Cluster LED Conversion
by Sean (seanyiya@hotmail.com)

[Linked Image]

-= Do at your own risk!! =-

Tools you'll need

Philips screw driver(2 size prefer)
Fine tip solder gun(2 solder gun makes it easier), 15/30w from Radioshack works good
Silver type solder
L.E.D. ~ Order page will be updated soon ~
and two steady hand =)


[Linked Image]
1. First unscrew the two screws, marked with yellow triangle
Pull the black plastic towards you


[Linked Image]
2. Unscrew 3(red circle)


[Linked Image]
3. Push the red marked tap and pull it out


[Linked Image]
4. As shown


[Linked Image]
5. Unscrew the 8 screws


[Linked Image]
6. Now lift the green circuit board away from the cluster, that two red circle is where needle connector are connected.
It will slide out with little force


[Linked Image]
7. This is how it looks when you pull the board all apart


[Linked Image]
8. Removing the LCD panel off from circuit board
Note next step...
Try pry off the LCD panel from the circle area
But be very gentle, prying from side to side


[Linked Image]
9. Push the tabs to unclip from the board


[Linked Image]
10. Yellow triangle are the gauge LED
Yellow circles are LCD LED
Now just unsolder those LED
Solder new LED back on with little marking on the LED aiming downwards


Now slap all that baby back together!!!

[Linked Image]

Source...
http://complabs.nevada.edu/~yoos3/led_stuff/install/gauge.htm

Where to buy LEDS...
http://store.ledmod.com/

Joined: May 2002
Posts: 5,979
Likes: 9
ECelica Admin
2001 Toyota Celica GT
ECelica Admin
2001 Toyota Celica GT
Joined: May 2002
Posts: 5,979
Likes: 9
[Linked Image]

[Linked Image]

[Linked Image]


[Linked Image]
It's not just your imagination...
Your day really does go by twice as fast while on EverythingCelica.com

Joined: Nov 2004
Posts: 53
Member
2000 Toyota Celica GT
Member
2000 Toyota Celica GT
Joined: Nov 2004
Posts: 53
hi im very new at customizing stuff so i might ask retarted questions. I was checking the led colors and i found some very cool colors. this it the picture of it. and i was wonderring if its possible to change right part of the rpm gauge to blue and indigo and also if i can leave the fuel gauge and temperature part the same color but take out the blue backgorund.And finally is it possible to change the red up part wheres the oil sign engine sign battery and brake signs to indigo.
oh ya i almost forgot is it possible to change the open door sign and no seatbelt sign to indigo too. and the low gas and left right signals and also all thees lttile sighs to indigo
thanks for ur help
1953342991-super_red_needle_blue_lcd_kit_indiglo_gauge.jpg

Last edited by sami; Nov 19, 2004 9:05am.

Joined: Mar 2022
Posts: 3
New Member
2000 Toyota Celica GTS
New Member
2000 Toyota Celica GTS
Joined: Mar 2022
Posts: 3
Hey all,

What are the LED sizes for interior (gauges, switch's, clocks etc...) all sites refrjeved to buy them no longer are up and running.

Thanks!

Join the conversation - Register Now or Log In to add your comment


Link Copied to Clipboard
Customize Your Toyota Celica Privacy Policy · About · Contact
Privacy Policy · About · Contact
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.
© CelicaHobby.com, 2001-2024
Powered by UBB.threads™ PHP Forum Software 8.0.1
(Snapshot build 20240918)