it depends on your idea of a large shot!if i was to run a large shot of nitro on the celica,i would,get forged pistons,rings,rods,i would ceramic coat the pistons,and head,valves.i would try to do some port work(the heads are really good from factory though)upgrade the fuel pump or run a separate small pump with a small fuel cell(that i would use c16 or mixture with ethanol)i would do it in two stages(i usually go 1st stage switch at throttle body and 2nd at t handle shift/button)of course,thats only the begining!the other variables has to be factored in ,like: clutch,tranny,tires,etc. you would have to have a good intake and exhaust system also!invest in a good fire extinguisher

in case there is a fire after the explosion(shi**T goes wrong sometimes!!)