Previous Thread
Next Thread
New Reply
Print Thread
Rate Thread

#22430 Jun 23, 3:44pm
Joined: Jun 2003
Posts: 35
Member
Member
Joined: Jun 2003
Posts: 35
Since Sunday, half the time when I shift into 4th gear it grinds.
Is there some call back on this or has any else had problems on the gts 6 speed?
Just 4th gear it grinds.

Joined: Mar 2003
Posts: 56
Member
Member
Joined: Mar 2003
Posts: 56
take it to the dealer if your still under warranty...if not change your tranny fluid...every 30K miles it is suppose to be replaced


Scott
1995 Eagle Talon TSI AWD (blue)
1995 Eagle Talon TSI AWD (red)
2000 Toyota Celica GT-S (red)

Joined: Jun 2003
Posts: 35
Member
Member
Joined: Jun 2003
Posts: 35
i don't have bumper to bumper anymore, does the certified warranty cover this? changed the fluid, it only grinds in 4th gear.

Joined: Apr 2003
Posts: 2,442
Wheezy Joe
2002 Kawasaki Ninja 250
Wheezy Joe
2002 Kawasaki Ninja 250
Joined: Apr 2003
Posts: 2,442
Mine does the same thing if you shift into first before you COMPLETELY stop.

does it need to have the stuff changed?


To have played and laughed with enthusiasm
and sung with exultation
To know even one life has breathed easier
This is to have succeeded.

Joined: Mar 2003
Posts: 56
Member
Member
Joined: Mar 2003
Posts: 56
What is your mileage??
If your under the 60K warranty or have an extended warranty it outta cover it.
either way I wouldn't accept that at all, take it in regardless, bitch at them. People on the board have blown their tranny at 45-50K from missshifting and had it replaced... Good luck keep us updated!




Scott
1995 Eagle Talon TSI AWD (blue)
1995 Eagle Talon TSI AWD (red)
2000 Toyota Celica GT-S (red)

hauhan #22435 Jun 24, 12:56pm
Joined: Mar 2003
Posts: 699
Senior Member
2000 Toyota Celica
Senior Member
2000 Toyota Celica
Joined: Mar 2003
Posts: 699
the symptoms sound like a synchronizer and bearing problem. check your powertrain warranty to be sure it's still valid. when you take it to the dealer they most likely need to duplicate the problem (since most technicians aren't too intuitive). good luck


2000 Black Gts 6-Speed
Flux Capacitor With Di-Lithium Crystals

Joined: May 2002
Posts: 3,286
ECelica Staff
2001 Toyota Celica GTS
ECelica Staff
2001 Toyota Celica GTS
Joined: May 2002
Posts: 3,286
mine sometimes grinds from 5th to 4th. If you shift slow, however; it wont grind.

Joined: Apr 2003
Posts: 18
Member
Member
Joined: Apr 2003
Posts: 18
i grind when going from 5th to 4th it sucks and makes me mad

Joined: Jun 2003
Posts: 35
Member
Member
Joined: Jun 2003
Posts: 35
I still have the 6 year/100,000 powertrain warranty, will that cover it? You know, I have the same thing with Steven, if I shift slow, it won't grind, only when I shift fast does it grind, uh . . . what a nasty feeling confused the grinding. I have 42,000 miles on the gts


Last edited by hauhan; Jun 25, 2003 5:54pm.

Joined: Mar 2003
Posts: 151
Member
2000 Toyota Celica
Member
2000 Toyota Celica
Joined: Mar 2003
Posts: 151
Your synchros went bad.

I had it, and lost a tranny too. So I think I'm quite the expert on this! wink


Absolutely Red awesome canyon road hugger with impressive straight-line acceleration.

Joined: Jun 2003
Posts: 35
Member
Member
Joined: Jun 2003
Posts: 35
so what's a synchros? wtf

Last edited by hauhan; Jun 26, 2003 6:44pm.

Joined: Mar 2003
Posts: 699
Senior Member
2000 Toyota Celica
Senior Member
2000 Toyota Celica
Joined: Mar 2003
Posts: 699
Originally Posted by hauhan
so what's a synchros? wtf


The synchronizer is a drum or sleeve that slides back and forth on the splined main shaft by means of the shifting fork. Generally, it has a bronze cone on each side that engages with a tapered mating cone on the second-and high-speed gears. A transmission synchronizer has two functions, which are as follows:

1. Lock the main shaft gear to the main shaft.

2. Prevent the gear from clashing or grinding during shifting.

When the synchronizer is moved along the main shaft, the cones act as a clutch. Upon touching the gear that is to be engaged, the main shaft is accelerated or slowed down until the speeds of the main shaft and gear are synchronized. This action occurs during partial movement of the shift lever. Completion of lever movement then slides the sleeve and gear into complete engagement. This action can be readily understood by remembering that the hub of the sleeve slides on the splines of the main shaft to engage the cones; then the sleeve slides on the hub to engage the gears. As the synchronizer is slid against a gear, the gear is locked to the synchronizer and to the main shaft. Power can then be sent out of the transmission to the wheels.


2000 Black Gts 6-Speed
Flux Capacitor With Di-Lithium Crystals

Joined: Jun 2003
Posts: 35
Member
Member
Joined: Jun 2003
Posts: 35
thanks dude, helped a lot rice

Joined: Apr 2003
Posts: 2,424
King of the Hill
2003 Toyota Celica GT
King of the Hill
2003 Toyota Celica GT
Joined: Apr 2003
Posts: 2,424
now that Hauhan's question has bein answered can we whore the place now ? rofl

Joined: Jun 2003
Posts: 479
the dude
2002 Toyota Celica GT
the dude
2002 Toyota Celica GT
Joined: Jun 2003
Posts: 479
by all means...whore away! thumbsup

Joined: Jun 2003
Posts: 479
the dude
2002 Toyota Celica GT
the dude
2002 Toyota Celica GT
Joined: Jun 2003
Posts: 479
begin the free for all... rofl grin

Joined: Jun 2003
Posts: 35
Member
Member
Joined: Jun 2003
Posts: 35
Just an update, got my tranny rebuilt. Changed the the synchros, some gears, and some other stuff.

Steven #22447 Aug 22, 11:14pm
Joined: Aug 2003
Posts: 6,365
Likes: 1
Caleb
2000 Toyota Celica
Caleb
2000 Toyota Celica
Joined: Aug 2003
Posts: 6,365
Likes: 1
my car sometimes grinds when you put it into reverse..not all the time though. anyone else know about this?

Joined: Mar 2003
Posts: 56
Member
Member
Joined: Mar 2003
Posts: 56
Originally Posted by sPeEd4tHeNeEd
my car sometimes grinds when you put it into reverse..not all the time though. anyone else know about this?


Mine does this too, push your clutch ALL the way to the floor.


Scott
1995 Eagle Talon TSI AWD (blue)
1995 Eagle Talon TSI AWD (red)
2000 Toyota Celica GT-S (red)

Joined: May 2002
Posts: 3,286
ECelica Staff
2001 Toyota Celica GTS
ECelica Staff
2001 Toyota Celica GTS
Joined: May 2002
Posts: 3,286
try pumping the clutch twice before you shift it in reverse, also when you shift into reverse, do it slowly.

Originally Posted by awdturbo
Originally Posted by sPeEd4tHeNeEd
my car sometimes grinds when you put it into reverse..not all the time though. anyone else know about this?


Mine does this too, push your clutch ALL the way to the floor.

Joined: Jul 2003
Posts: 25
Member
2002 Toyota Celica GT
Member
2002 Toyota Celica GT
Joined: Jul 2003
Posts: 25
Yea, mine will grind every now and then. My friend tells me just to wiggle the shift knob a bit before putting it in.

PS. does anyone's shift to reverse only go in half way sometimes?

Joined: Jul 2003
Posts: 254
Member
2000 Toyota Celica
Member
2000 Toyota Celica
Joined: Jul 2003
Posts: 254
Originally Posted by plkachiu
Yea, mine will grind every now and then. My friend tells me just to wiggle the shift knob a bit before putting it in.

PS. does anyone's shift to reverse only go in half way sometimes?
YEAH, I hate that. I have to push it hard to the side and forwards. Maybe some springs need adjusting.


MAKE YOUR TIME

Joined: Jun 2003
Posts: 35
Member
Member
Joined: Jun 2003
Posts: 35
My clutch is totally fine, just my tranny went. Interesting.

Joined: Jun 2003
Posts: 63
Member
Member
Joined: Jun 2003
Posts: 63
mine used to do that until i changed the tranny with a supposedly 03 spankin new tranny from the dealer under warranty...but now, everytime i go into reverse, it never grinds. my guess is that some of ya's tranny will go bad in the long run, but i hope not.

Joined: Jun 2003
Posts: 35
Member
Member
Joined: Jun 2003
Posts: 35
thank god i was under warranty, i wonder how much it would cost if it weren't?

Join the conversation - Register Now or Log In to add your comment


Link Copied to Clipboard
Member Spotlight
toysport_celica
toysport_celica
2000 Toyota Celica
Ca

Posts: 52
Joined: August 2004
Thank you.: me, myself, and I...!
Random: a bowl of rice, fried chicken, and a glass of water!
Show All Member Profiles 
Recent Topics
Where to find schematics for transmission for a 94 Celica?
by Kerfufflez - Dec 17, 2024 12:15am
Buying from non-US website?
by DOMINUS - Dec 12, 2024 4:57pm
Customize Your Toyota Celica Privacy Policy · About · Contact
Privacy Policy · About · Contact
CelicaHobby.com is an independent Toyota Celica enthusiast website. CelicaHobby.com is not sponsored by or affiliated with Toyota Motor Sales, USA, Inc. in any way. The Toyota and Celica names and logos are trademarks owned by Toyota Motor Sales, USA, Inc.
© CelicaHobby.com, 2001-2024
Powered by UBB.threads™ PHP Forum Software 8.0.1
(Snapshot build 20240918)