Recently I have noticed that with my SRI
installed I get and weird fluctuation in RPMs when my Radiator fans cut on...then the RPMs stabilize...and when the fans turn off the RPMs are eratic then re-stabilize...side note the stock air box does this as well just not as bad...
Either way, this is the 1st time this has ever happened kinda weird since I've had this thing on for extened periods then back to stock at other periods of time.
Anyway I was tinkering and stuck a piece of heavy cardborad to deflect and test the heat soak/forced air into the Intake
...and the cardboard reduced the RPM flux. So now I want to know what the maximum dimensions of the filter element will fit inside the Injen
Heat Shield...I know the flange will fit fine.
Here are the dimensions of my filter element:
Flange = 2.75 inches
Filter base diameter = 6 inches
Filter top diameter = 5 inches
Filter length = 6.5 inches
unfortunately all I found was the heat shield specs for the flange fitment...Thanks for the help in advanced.