|
Joined: Sep 2003
Posts: 705
Senior Member 2000 Toyota Celica
|
Senior Member
2000 Toyota Celica
Joined: Sep 2003
Posts: 705 |
Ok I ordered a Lambo Doors kit (JtAutoStyle Evo doors www.jtautostyle.com [ jtautostyle.com] ) Until this morning I was pretty happy , but now I spoke with one of my friend that work at a Nissan dealer (his a mechanic) and he told me that the worst thing I can do too my cars is too put some lambo doors... He told me that there a 350z who put a kit and the have to change his doors trim cause the way the doors open... broke the door trim (door panel)... Is this true... ??????? Is this ever happen to you ??? He also told me that those kit are extremely hard too install ! How long does it take ? How hard it is ??? Do you have any regret about your kit ???? Thanks everyone too light me up !!! by the way here a pics of the kit :
Mom, I Lost you on April 7th 2004, but I will remember you for ever... I'm missing you
|
|
|
|
Joined: Sep 2003
Posts: 705
Senior Member 2000 Toyota Celica
|
Senior Member
2000 Toyota Celica
Joined: Sep 2003
Posts: 705 |
Here another pics of it on VoodooGTS cars :
Mom, I Lost you on April 7th 2004, but I will remember you for ever... I'm missing you
|
|
|
|
Joined: Sep 2003
Posts: 705
Senior Member 2000 Toyota Celica
|
Senior Member
2000 Toyota Celica
Joined: Sep 2003
Posts: 705 |
Mom, I Lost you on April 7th 2004, but I will remember you for ever... I'm missing you
|
|
|
|
Joined: Sep 2003
Posts: 705
Senior Member 2000 Toyota Celica
|
Senior Member
2000 Toyota Celica
Joined: Sep 2003
Posts: 705 |
Mom, I Lost you on April 7th 2004, but I will remember you for ever... I'm missing you
|
|
|
|
Joined: Jun 2004
Posts: 908
Senior Member 2004 Toyota Celica GT
|
Senior Member
2004 Toyota Celica GT
Joined: Jun 2004
Posts: 908 |
I have that kit, but i havnt installed it yet due to the same questions. When i went to my body shop they tolod me i was crazy to do that due to door hitting the fender issue's. But im still thinkin of doing it. Its pretty ez to do really. Just take off your front bumper and remove both fenders (use a breaker bar) and go from there. From my tlakin with Voodoo he loves his and they are flawless but who knows. If your looking for some I can sell you mine maybe? I'll let them go for 775 shipped. Lemme know.
If know one buys them i'll prob just put them on
|
|
|
|
Joined: May 2002
Posts: 559
Senior Member 2002 Toyota Celica
|
Senior Member
2002 Toyota Celica
Joined: May 2002
Posts: 559 |
Hey what's up guys, I had this kit for almost about a year now and havent had a problem yet. I have no problem getting in or out and I don't regret on getting them. I really like it, it's a nice show mod.
I never installed the jt evo kit, i actully had jt install it and it took them about 3-5 hours.
|
|
|
|
Joined: Sep 2003
Posts: 705
Senior Member 2000 Toyota Celica
|
Senior Member
2000 Toyota Celica
Joined: Sep 2003
Posts: 705 |
Is this true that they hit the fender ????
Mom, I Lost you on April 7th 2004, but I will remember you for ever... I'm missing you
|
|
|
|
Joined: Aug 2004
Posts: 740
Senior Member 2002 Toyota Celica
|
Senior Member
2002 Toyota Celica
Joined: Aug 2004
Posts: 740 |
Hi SSCarbonGTS,
How much did you pay for with shipping?
|
|
|
|
Joined: Oct 2002
Posts: 45
Member 2000 Toyota Celica GTS
|
Member
2000 Toyota Celica GTS
Joined: Oct 2002
Posts: 45 |
ok guys i have this kit and i have no problems with it the door open normal and than life up the only thing that went wrong for my is that i have blitz side and the door would hit them if you have the stock sides than you will be fine am a mechanic to and i do all my work myself to my cel the hardest part on this kit is fitment but you should have no troble doing this your self
|
|
|
|
Joined: Oct 2002
Posts: 45
Member 2000 Toyota Celica GTS
|
Member
2000 Toyota Celica GTS
Joined: Oct 2002
Posts: 45 |
these two pic are of my cel
|
|
|
|
Joined: Sep 2003
Posts: 705
Senior Member 2000 Toyota Celica
|
Senior Member
2000 Toyota Celica
Joined: Sep 2003
Posts: 705 |
Hi SSCarbonGTS,
How much did you pay for with shipping? I don't pay for shipping... my friend have a speedshop he made me 1175 $ plus taxe Candadian $ so they cost me about 1350-1400 $ canadian . he ordered 3 kit...
Mom, I Lost you on April 7th 2004, but I will remember you for ever... I'm missing you
|
|
|
|
Joined: Nov 2004
Posts: 636
Senior Member 2001 Toyota Celica GT
|
Senior Member
2001 Toyota Celica GT
Joined: Nov 2004
Posts: 636 |
^^ your car is so fucken bad ass i love that hood of yours
|
|
|
|
Joined: Sep 2003
Posts: 705
Senior Member 2000 Toyota Celica
|
Senior Member
2000 Toyota Celica
Joined: Sep 2003
Posts: 705 |
I heard that you need too add extra inch to the wire in the doors ???
Mom, I Lost you on April 7th 2004, but I will remember you for ever... I'm missing you
|
|
|
|
Joined: Nov 2004
Posts: 319
Member 2002 Toyota Celica
|
Member
2002 Toyota Celica
Joined: Nov 2004
Posts: 319 |
from what I've read they come with wiring extentions, but you don't really need them.. people are probably getting the hitting the fender thing from people not installing them right. you have to modify the fender to get the hinges to fit because they tuck behind it and if you notice there is metal sticking out on the inside of the fender that will be in the way your supposed to bend that over so the hinges will fit. celicaGTS2000 is it harder to align a door and get it to fit right on lambo hinges than on regular hinges or is it about the same difficulty as if you were replacing the door or the hinges regular?
|
|
|
|
Joined: Oct 2002
Posts: 45
Member 2000 Toyota Celica GTS
|
Member
2000 Toyota Celica GTS
Joined: Oct 2002
Posts: 45 |
no lambo hinges are hard because it is not realy a true fit with the regular hinges is realy eazy cause there is no sag in the door and the pacemant of the hingerare closer and smaller together. you are right about the finder to you do half to cut and roll it back i did not half to use any extention wire the stock one work fine.
|
|
|
|
Joined: Feb 2005
Posts: 81
Member 2003 Toyota Celica
|
Member
2003 Toyota Celica
Joined: Feb 2005
Posts: 81 |
ok, i have the lambo door kit as you probably know. i got it from carexcess.com its a decah lambo door kit and a local shop near me ordered it for me. i also have the trd kit and have no problems with it hitting the side skirts. when installing it you need to take the front bumper and fenders off. when the fenders are off, you need to cut off a piece of the fender on the inside (the part closest to the hinge). i did not have to roll the inside of the fender, only cut. if the door hits anything or is too low or high so it doesnt line up then you can adjust it with the alan screw that is attached to the hinge. so far i have had no problems with the hinges or shocks and have had them for almost a year. everything fits perfectly and once in a while requires some adjusting of the alan screw because the screw loosens and the door wont line up correctly. after a while and after you break in the hinge, this will happen less and less. remember, different people have different company kits and some will have different fitment, but what i have is a decah kit and wrote about my experiences with only this kit. tonight around 10pm i will post pics of the exact piece that requires cutting and the location of the alan screw to adjust for proper fitment. heres a pic of how it turned out.
|
|
|
|
Joined: Sep 2003
Posts: 705
Senior Member 2000 Toyota Celica
|
Senior Member
2000 Toyota Celica
Joined: Sep 2003
Posts: 705 |
Thanks everyone !!! Now I don't have regret anymore !!!!
Mom, I Lost you on April 7th 2004, but I will remember you for ever... I'm missing you
|
|
|
|
Joined: Feb 2005
Posts: 81
Member 2003 Toyota Celica
|
Member
2003 Toyota Celica
Joined: Feb 2005
Posts: 81 |
here are pics of the hinges screw, and what to cut off the fender
|
|
|
|
Joined: Feb 2005
Posts: 81
Member 2003 Toyota Celica
|
Member
2003 Toyota Celica
Joined: Feb 2005
Posts: 81 |
the piece that was cut off of my fender...
|
|
|
|
Joined: Feb 2005
Posts: 81
Member 2003 Toyota Celica
|
Member
2003 Toyota Celica
Joined: Feb 2005
Posts: 81 |
the arrow points to the place where you can tighten or loosen the hinge
|
|
|
|
Joined: Nov 2003
Posts: 101
Member 2000 Toyota Celica GT
|
Member
2000 Toyota Celica GT
Joined: Nov 2003
Posts: 101 |
I have no problems with my lambodoors. and i have painted interior and the paint is still scrach free..
|
|
|
|
Joined: Nov 2004
Posts: 319
Member 2002 Toyota Celica
|
Member
2002 Toyota Celica
Joined: Nov 2004
Posts: 319 |
bobsi what's up with having two different wheels? any particular reason?
|
|
|
|
Joined: Dec 2003
Posts: 781
Senior Member 2000 Toyota Celica
|
Senior Member
2000 Toyota Celica
Joined: Dec 2003
Posts: 781 |
Here's a complete installation guide for lambo doors: http://plaza.umin.ac.jp/~satoshi/mod01Oen.htmlProps to satoshi for making it.
|
|
|
|
Joined: Jan 2005
Posts: 278
Member 2003 Toyota Celica GT
|
Member
2003 Toyota Celica GT
Joined: Jan 2005
Posts: 278 |
its a sweden thing...crazy, sweden people...
|
|
|
|
Joined: Jun 2004
Posts: 908
Senior Member 2004 Toyota Celica GT
|
Senior Member
2004 Toyota Celica GT
Joined: Jun 2004
Posts: 908 |
I'm doing my install soon, I decided to keep mine so I will make another intall guide and will tkae pictures of when Im doing mine. I figured I mihgt as weel when my car is up on jacks anyways.
|
|
|
|
Joined: Jun 2004
Posts: 908
Senior Member 2004 Toyota Celica GT
|
Senior Member
2004 Toyota Celica GT
Joined: Jun 2004
Posts: 908 |
BTW Does anyone know where I can find Extentions for the Cables?
|
|
|
|
Joined: Feb 2005
Posts: 27
Member 2003 Toyota Celica GT
|
Member
2003 Toyota Celica GT
Joined: Feb 2005
Posts: 27 |
Im also wanting lambo doors. Now im no little guy lol!! How hard is it to get in and out of the doors?? I have ppl that tell me its a pain in the ass and not worth it, and then there are others who say its not hard. Can someone with experience tell me??
What?
|
|
|
|
Joined: Feb 2005
Posts: 81
Member 2003 Toyota Celica
|
Member
2003 Toyota Celica
Joined: Feb 2005
Posts: 81 |
ok, im not gonna lie, it is harder to get in and out of than a normal door. im pretty small and can get out even without lifting up the door. not everyone can do this, but not everyone can get in and out with the door up either. after a while i got used to it and so now its not a big deal anymore. if your having trouble getting out of your bucket seats now then its prob not a good idea to get the doors. im not saying its impossible if anyone is a big guy, but you will prob hate it after a while if you really have trouble getting out. i would only get it if your into the show scene and go to shows alot.
|
|
|
|
Joined: Sep 2003
Posts: 705
Senior Member 2000 Toyota Celica
|
Senior Member
2000 Toyota Celica
Joined: Sep 2003
Posts: 705 |
thanks for the pics jordon GT2111, let us know the install goes !!
Mom, I Lost you on April 7th 2004, but I will remember you for ever... I'm missing you
|
|
|
|
Joined: Jun 2004
Posts: 908
Senior Member 2004 Toyota Celica GT
|
Senior Member
2004 Toyota Celica GT
Joined: Jun 2004
Posts: 908 |
^^^ Will do Im starting it soon as I finish lowering my car!
|
|
|
|
Joined: Sep 2003
Posts: 705
Senior Member 2000 Toyota Celica
|
Senior Member
2000 Toyota Celica
Joined: Sep 2003
Posts: 705 |
^^^ Will do Im starting it soon as I finish lowering my car! Good luck
Mom, I Lost you on April 7th 2004, but I will remember you for ever... I'm missing you
|
|
|
ForceFed
2002 Toyota Celica
Southern Utah
Joined: September 2004
Thank you.: my older brother jason who cosigned my loan Random: Girls are like parking spots... all the good ones are taken.
|
Show All Member Profiles
|
|
- Part Reviews
- OEM Parts Catalog
- Body Kits, Ground Effects
- Hoods, Hood Scoops
- Spoilers, Wings, Splitters
- Side Mirrors
- Head/Tail Lights & Bulbs
- Interior Appearance
- Interior Performance
- Engine Dress-up Kits
- Exhaust Systems
- Engine Performance
- Bars, Braces, Coilovers
- Shocks, Springs
- Wheels, Tires, Brakes
- Audio, Video, Security
|
|
|
|