Hey guys, just want to share the door remote upgrade for stock alarm system, this new item works perfectly, cost is $23 plus about $5 for the key duplication at your local locksmith. The best part is the key and remote are one, so less junk in your pocket. Also want to add that you all should get the Apple Airtag, if any of you are constantly losing your keys like me, you will love the Airtag, it even uses other people iphone's connection to ping its location to you. Lets say you leave your car and your keys with your mechanic, and if he has an iphone, then you can open up the app and see where he goes with your car, this is a neat feature that makes it great.
https://amzn.to/3yGFtWpKey cover:
https://amzn.to/3sgzJAiprogram instruction:
How to Program a 2000 Toyota Celica Keyless Entry Remote Fob
Step by Step How to Programming Instructions:
1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked.
2. Perform these steps within 5 seconds.
A. Insert the key into the ignition(Do NOT Turn) Pull key out.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.
3. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into the ignition(Do NOT Turn) Pull key out.
4. Perform these steps within 40 seconds.
A. Close then open the drivers door.
B. Close then open the drivers door.
C. Insert the key into ignition and leave it in ignition.
D. Close the drivers door.
E. Turn the ignition to ON (Do NOT Start) then back to OFF.
F. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.
C. Repeat steps A and B in step 6 for each new remote.
7. Open drivers door.
