Celica Forums General Discussion Engine and Performance Help P1349

I have a problem with my Celica GTS 2000. This is going to be a long explanation of the problem and what I have done. I need your help with this. Thanks in advance.

So I have a code P1349 no valve lift.
I bough this car about two months ago. For what the seller told me this car sat for a long time 3-4 years before selling it. The car was all original and ran well for the most part. I have fixed most of the problems. The car since I bought it only had that code and no other code has come up ever since. This is what I have done:

1. Change the oil.
2. Cleaned OCV (oil control valve) filters.
3. Change lift bolts to the newer version. It had the original ones.
4. Changed both OCV.
5. Did a diagnostic test con OCV closest to the front on the engine (closest to the serpentine belt) by attaching 2 wires to it and connecting it to the battery once the car is on operating temperature. The car did not lower its revolutions, OCV clicked. I did this on the old and new OCV and had the same result, no rpm change.

The car has a high iddle about 1200 1000 rpm. I don't know if this is related.
I don't know what else to do. Please any help is greatly appreciated.

P1349 is variable valve timing, not valve lift.

https://parts.olathetoyota.com/p1349-code

Dirty oil, sludge, carbon deposit ect may be impeding oil flow and preventing variable valve timing.

You can try dissolving deposits and flushing engine oil with Motor Medic's GUNK ($6 Walmart). That may clear up any oil blockage. I would use it half strength and idle engine 15 to 20 minutes. My dumped oil was thick, black and sludgy. Do it with 2 or 3 oil changes. Engine would be clean and runs smoother.