|
Joined: Apr 2020
Posts: 6
New Member
|
New Member
Joined: Apr 2020
Posts: 6 |
Hey folks,
New guy here, just picked up an ‘03 GT for a steal. Computer is throwing these codes P0100 P0110 P0031 P0037
Now I’m reading the causes of these codes and it seems overwhelmingly that the cold air intake installed on the car could be a part of or the cause of most of these codes.
Additional info: the only mod I’m aware of is the cold air intake, no exhaust modifications done. The car is a GT, but has a GT-S dash cluster installed, the owner seemed to have no idea about this. The RPM gauge seems to be horribly off and I’m not so sure about the speedometer yet but I suspect it is also off.
Basically I’m wondering, if this cai was installed poorly, what should I look for. And other than that, what are other potential causes for this combination of codes?
Also since the GT-S dash was installed, is there anyway to tell by physically looking at the ecu if it’s for a 1zz or 2? Because I think there may be a possibility that it’s a 2zz ecu as well (or is that even possible)
P.S. it’s a 1zz-fe with a 5 speed manual trans if I didn’t make that clear.
Thanks, Payloader
|
|
|
|
Joined: Apr 2020
Posts: 6
New Member
|
New Member
Joined: Apr 2020
Posts: 6 |
Also it has the cruise control lever on the column but it doesn’t work at all nor do I see a cruise control light (lit or unlit) on the dash. This is why I’m curious about the ECU.
|
|
|
|
Joined: Dec 2017
Posts: 241 Likes: 30
Member
|
Member
Joined: Dec 2017
Posts: 241 Likes: 30 |
P0100 is Mass Airflow Sensor malfunction. It may cause other codes.
Swap in a known -good MAS. Most Toyotas and Lexuses use the same MAS made by Denso. If that fixes the codes then the MAS is defective,
You can clean the MAS' sensor element with non-residual contact cleaner spray. Sometimes MAS looks good and tested good but still defective. You may need to buy a new one.
|
2 members like this:
CaffeineKid, Payloader |
|
|
|
Joined: Apr 2020
Posts: 6
New Member
|
New Member
Joined: Apr 2020
Posts: 6 |
Thanks! Will try that out and go from there
|
|
|
|
Joined: Apr 2020
Posts: 6
New Member
|
New Member
Joined: Apr 2020
Posts: 6 |
Also what is this plug and where is it supposed to go. I’m guessing something airbox related?
Another thing, I was unable to find a door pun & bushing kit anywhere online. Does anyone know if corolla/matrix pins are the same?
|
|
|
|
Joined: Dec 2017
Posts: 241 Likes: 30
Member
|
Member
Joined: Dec 2017
Posts: 241 Likes: 30 |
Your intake has been modified, not stock.
I dont see the airbox and the MAS on the air intake.
|
|
|
|
Joined: Apr 2020
Posts: 6
New Member
|
New Member
Joined: Apr 2020
Posts: 6 |
Yes like I said, the only mod I am aware of is the cold air intake.
|
|
|
- Part Reviews
- OEM Parts Catalog
- Body Kits, Ground Effects
- Hoods, Hood Scoops
- Spoilers, Wings, Splitters
- Side Mirrors
- Head/Tail Lights & Bulbs
- Interior Appearance
- Interior Performance
- Engine Dress-up Kits
- Exhaust Systems
- Engine Performance
- Bars, Braces, Coilovers
- Shocks, Springs
- Wheels, Tires, Brakes
- Audio, Video, Security
|
|
|
|